Yes...you can run your show from this box. The K16/Beaglebone combo features autonomous showplayer capability via FPP running on the Beaglebone, multi-sync to other controllers, and audio output. Easy closed box connection to all four RJ45 Receiver outputs + LAN, 2 DMX outs, and audio output. Includes the optional onboard Kulp FM tuner. (for best tuner operation it is recommended to add an antenna)
Kulp 16A-B
Beaglebone Black
MTM Enclosure
(1) 12V Mean Well LRS 600 PSU
16 Pigtails
(3) RJ45 Chassis Connectors
(2) Pigtail RJ 45 Connectors
Kulp FM Tuner Board
(2) DMX Chassis Mount Connectors
1/8" Stereo Audio out chassis mount jack
We welcome the opportunity to modify builds to your specs.
Build may differ from photos shown. This build utilizes 1" output connectors not PG Glands. Built after purchase. Allow 2 to 4 weeks for delivery based on availability of components.
Built-Tested-Ready-to-Run
While this build can operate as a typical remote player which receives sequence data from a Rpi or showplayer, it is capable of Standalone operation. Upload sequences to the onboard SD card, set master mode, then either run sequences via the web interface or directly from the included pushbuttons. (See video below)
Choose either Falcon F16v4 or V5
MTM Enclosure
12v LRS 600 PSU
16 Pigtails
(2) RJ45 Chassis Connectors
Falcon Audio Board
1/8" Chassis Stereo Audio output
(4) Mounted Programmable Pushbuttons if V4 OR (2) Pushbuttons if V5
8 Port Power Distribution Board
8dBi WiFi Dual Band Antenna 2.4GHz 5.8GHz Antenna (connected to F16 Wifi module)
DMX XLR Chassis Mount Connector
LED V/A Meter
Digital Programmable Thermostat
Bud Vent
40mm Fan
Interior LED Light Strip
We welcome the opportunity to modify builds to your specs.
Build may differ from photos shown. This package does not utilize PG Glands. Built after purchase. Allow 2 to 4 weeks for delivery based on availability of components.
Choose either F16v4 or V5. In addition to standard features, these Falcon controllers are capable of Standalone operation. Upload sequences to the onboard SD card, set master mode, then either run sequences via the web interface or directly from the included pushbuttons. The pushbuttons are multi function capable based on the settings of your choice in the web interface. Note that the standalone feature does not output to other controllers (Multisync). (See video below)
Redeem discount code at checkout.
Choose Falcon F16v4 or V5
Falcon Audio Board
Bud Enclosure 32022
12v Mean Well LRS-600 PSU
(16) 13" Pigtails
(4) Mounted Programmable Pushbuttons w/V4 or (2) Pushbuttons w/V5
(4) RJ45 Chassis Connectors
8dBi WiFi Dual Band Antenna 2.4GHz 5.8GHz Antenna (connected to F16 Wifi module)
1/8" Chassis Stereo Audio output
DMX XLR Chassis Mount Connector
LED V/A Meter
Digital Programmable Thermostat
Bud Vent
40mm Fan
We welcome the opportunity to modify builds to your specs.
Build may differ from photos shown.
This package is built after purchase. Allow 2 to 4 weeks for delivery based on availability of components.
